Trouver Tube De Cylindre, Tuyaux En Acier, Tuyau En Acier Sans Soudure dans le répertoire Industry, Reliable Fabricant / Fournisseur / Factory de Chine

Panier (0)
Accueil > Liste de Produits > Tuyaux en acier de précision > Tuyaux d'acier de précision pour l'amortisseur > Tuyau en acier au carbone de haute qualité pour amortisseur de moto

Tuyau en acier au carbone de haute qualité pour amortisseur de moto

Informations de base

Modèle:  HTSP

Description du produit

Modèle N °: HTSP Technique: Traitement de surface dessiné par froid: Huile Section Forme: Rond Spécifications: 6-68MM Code HS: 7304391000 Type: Matériau sans soudure: Acier au carbone Utilisation: Hydraulique / Automobile Pipe, The Shock Absorber Trademark: HTSP Origine: Chine

Product Name

E215 steel pipe

E235 steel pipe

E355  steel pipe

chemical analysis

C: 0.10;Si: 0.05;Mn: 0.70;P: 0.025; S: 0.025;Al: 0.025

C: 0.17;Si: 0.35;Mn: 1.20;P: 0.025; S: 0.025

C: 0.22;Si: 0.55;Mn: 1.60;P: 0.025; S: 0.025

Tensile Strength

+C, 430MPa; +LC, 380MPa;+SR, 380MPa;+A, 280MPa;+N,290-430MPa

+C, 480MPa; +LC, 420MPa;+SR, 420MPa;+A, 315MPa;+N, 340-480MPa

+C, 640MPa; +LC, 580MPa;+SR, 580MPa;+A, 450MPa;+N,490-630MPa

Yield strength

+SR, 280MPa; +N, 215MPa

+SR, 350MPa;

+N, 235MPa

+SR, 450MPa; +N, 355MPa

Standard

EN10305-1

Length

As customer s request

Packaging

Standard export packing, packed in woven bags, with two nylon slings, or can be customized as request

Heat Treatment/      Delivery Condition

  1. Cold finished (hard)   BK(+C)

Tubes do not undergo heat treatment following the final cold forming and, thus, have a rather high resistance to deformation

  1. Cold finished (soft)    BKW(+LC)

The final heat treatment is followed by cold drawing involving limited deformation. Appropriate further processing allows a certain degree of cold forming (e.g. bending, expanding)

  1. Cold finished and stress-relieved annealing BKS(+SR)

Heat treatment is applied following the last cold forming process. Subject to appropriate processing conditions, the increase in the residual stresses involved enables both forming and machining to a certain degree.

  1. Annealed    GBK(+A)

The last Cold forming process is followed by annealing in a controlled atmosphere.

  1. Normalized   NBK(+N)

The last cold forming process is followed by annealing above the upper transformation point in a controlled atmosphere.

Delivery Time

Within 35-50 days from receiving deposit

Payment Term

100% L/C at sight or 30% deposit, 70% balance against copy of B/L

Usage/Application

Pipes for automobile and motorcycle

Main Market

Asia, Middle East, Europe, etc.

Description du produit Diamètre extérieur: 25mm -500mm
Epaisseur de paroi: 2-50mm
Matériel: ST52, Q345B, CK20, CK45, SAE1026
Standard: GB / T8713-88, GB / T3639-2009, DIN2391, EN10305
Cold Drawn Tube peut être produit selon les exigences des clients que le degré de précision peut atteindre H9 / H11.
Composition matérielle et chimique
DIN2391 standard ST52, EN10305 standard E355, 16Mn, ASTM A106B, C20 / 20 #, CK45
High Quality Carbon Steel Pipe for Motorcycle Shock Absorber
High Quality Carbon Steel Pipe for Motorcycle Shock AbsorberHigh Quality Carbon Steel Pipe for Motorcycle Shock AbsorberHigh Quality Carbon Steel Pipe for Motorcycle Shock Absorber

Groupes de Produits : Tuyaux en acier de précision > Tuyaux d'acier de précision pour l'amortisseur

Envoyer à ce fournisseur
  • *Sujet:
  • pour:

  • *Messages:
    Votre message doit comporter de 20 à 8000 caractères